As Geeenius commented there were no sections provided with some...

As Geeenius commented there were no sections provided with some announcements. Attached are nine Sections done manually.

Still another one or two batches of assays to come so preliminary at present.


I tried to be accurate but there will be errors and omissions so treat carefully and DYOR.

At worst I hope locations are within plus or minus 5m or less except where holes have been projected.
Location Map for Sections.

[The light blue line is at a nominal 10 M% and the higher grade/m RED Orange lines give a rough guide to where better grade thickness is present within that envelope]
Only a few comments for now.

IMO more drilling will be needed locally as continuity/faulting/variability are not easy to reconcile at this scale. Detail company logs, historical work and 3D software will help AZS if such drilling is needed.

I suspect there may be some issue with the mapped geology boundaries. Holes 72, 83 and 87 in particular caused me correlation difficulties.

As part of interpretation I have assumed (among other things):

The mineralisation and Arenillas/Revancha contacts are essentially horizontal.

holes were drilled some 5m into the Revancha Rhyolite. Not a good assumption - one I may ask TR or someone about at the GM coming up soon.

PDF with raw data.


PDF with very rough interpretations for sections.

With the available data it is more a matter of joining dots rather than an accurate interpretation. Whether one dot should connect to another is not clear in many instances so I have invoked quite a few faults but dipping strata may be involved.

Enjoy the rest of the long weekend.

GLTAH