Ann: Drilling Update, page-85

Water/brine samples from target intervals were collected by the Bailer test; purging isolated sections of the hole of all fluid a total of five times to minimize the possibility of contamination by drilling fluid (fresh water), although some contamination (5-15%) does occur. The hole was then allowed time to re-fill with ground water. On the fifth purge the sample for lab analysis is collected (~1.5L). The casing lining the hole ensures contamination with water from higher levels in the borehole is likely prevented. Samples were taken from the relevant section based upon geological logging and conductivity testing of water.• Water/brine samples were collected from the following intervals to be sent for assays: 460- 662m and 633 to 662m