PXX 7.14% 0.8¢ polarx limited

Ann: Drilling continues to expand Zackly mineralisation, page-51

ANNOUNCEMENT SPONSORED BY PLUS500
ANNOUNCEMENT SPONSORED BY PLUS500
CFD TRADING PLATFORM
CFD Service. Your Capital is at risk
CFD TRADING PLATFORM CFD Service. Your Capital is at risk
ANNOUNCEMENT SPONSORED BY PLUS500
CFD TRADING PLATFORM CFD Service. Your Capital is at risk
  1. 11,185 Posts.
    lightbulb Created with Sketch. 2609
    Yes they did.

    On 24 Jan 2018 PEX reported high grade base metal results from Wagga Tank/Wirlong using XRF results (see link to announcement below and extract from the announcement)

    https://www.asx.com.au/asxpdf/20170124/pdf/43fhb8r52tnm70.pdf

    PEX XRF results 2.PNG

    7 weeks later they then reported the assay results in this announcement

    https://www.asx.com.au/asxpdf/20170314/pdf/43grwmgd6w6txd.pdf

    The original results from the XRF gave 11m @ 11.7% Zn, 6.5% Pb, 67g/t Ag and 0.3%Cu and the assay results 7 weeks later gave the results I posted in my previous post which were reported as a single interval over 27m rather than two separate intervals over 13m and 11m.
    The assays results showed up higher grades than those reported to the ASX previously from XRF but still confirmed the high grade nature of the mineralisation reported with XRF.

    So you are in fact the person that is wrong. XRF can and has been used to report grades over continuous drill intervals (in the example above over an 11m drill interval) by people who know what they are doing with these devices and has been used successfully on ASX to report high grade base metal and Ag drill results. Maybe you should take the time to read what I say and learn something.

    If PXX had high grade intervals of base metals and an XRF machine they could estimate those grades and report them exactly as PEX has done above.

    There are no massive sulphides indicated in any of the cores from the recent drilling. The disseminated bornite is very unlikely to produce high grades. At best it will produce grades of similar tenor to what has already been discovered which will need to be shallow and open pittable to produce results of economic interest.

    The core I showed from the Monty deposit in WA had disseminated bornite within other Cu baring massive sulphides so was able to produce very high grade.

    With an XFR machine the geologists at PXX should have been able to narrow down the volumetric grade estimations of the observable sulphides or actually give actual grade estimates as PEX have done. The big percentage ranges for the volumetric contents of the various sulphide minerals that PXX has publish in their drill log descriptions only serves to help feed market speculation and nothing else IMO.

    The only serious potential for high grade that I have seen is at the base of hole ZX-18020 (which I've estimated) and possibly for high grade gold (given some flecks of visible gold have been observed in some core samples).

    Eshmun
 
watchlist Created with Sketch. Add PXX (ASX) to my watchlist
(20min delay)
Last
0.8¢
Change
0.001(7.14%)
Mkt cap ! $21.37M
Open High Low Value Volume
0.8¢ 0.8¢ 0.8¢ $320 42.64K

Buyers (Bids)

No. Vol. Price($)
19 9336073 0.7¢
 

Sellers (Offers)

Price($) Vol. No.
0.8¢ 4420618 5
View Market Depth
Last trade - 15.46pm 29/11/2024 (20 minute delay) ?
PXX (ASX) Chart
arrow-down-2 Created with Sketch. arrow-down-2 Created with Sketch.